Error Code 80200011 in Windows 7 can put your system in a critical scenario or your computer might get serious problems, such as Blue Screen, system crash or program freeze. That is why, it is essential to troubleshoot 80200011 Windows 7 error.
Error Code 80200011 in Windows 7 is typically caused by misconfigured system files that generate registry errors within your computer system. This Windows error 80200011 can result in program lock-ups, slow PC performance, system crashes, computer freezing and many more.
Table of Contents
The common error message may appears as:
–Windows could not search for new updates. An error occurred while checking for new updates for your computer.
-Some updated were not installed. Failed: 13 updates
-Error(s) found: Code 80200011 Windows update encountered an unknown error.
Potential Causes of the Error Code 80200011
80200011 errors usually takes place when you are trying to install new programs over old ones without the old programs being completely uninstalled. This can result in registry pile-ups and 80200011 error messages.
The error can also occur due to the following reasons:-
1. Internet Connection issue
2. Incorrect system configuration
3. System Level conflict
4. Application conflict
5. Junk store location is infected with malware
SpyHunter integrating newly enhanced rootkit detection technology, enables it’s users to perform an instant rootkit scan and eliminate the detected malware programs from PC.
Don’t worry!
………by reading this blog, you will find a good solution to fix it immediately.
4 Simple Methods to Resolve Error Code 80200011
Method 1: open windows update troubleshooter
Run the Windows Update troubleshooter to resolve the issue. It makes sure that your system is connected to the network, and verifies to check whether your network adapter and Windows Update services are running appropriately.
Method 2: check for corrupt system files
Step#1: In Start Search box type “CMD”.
Step#2: Click on CMD.
Step#3: Just copy following commands in the command Prompt (Simply select the command and hold Ctrl+C and press Ctrl+V in command prompt to paste)
sfc /scannow
The system will take certain time to diagnose the error. Let it run for a while. If it finds any issues in “system” integrity, it will fix it automatically.
Note: You will need Administrator Access to run the command overhead. Simply Right Click on cmd and select “Run as Administrator”.
Method 3: Restart the Background Intelligent Transfer Service (BITS)
Step#1: Click “Start”.
Step#2: Type “services.msc” in the “Start” search box and “Enter.”
Step#3: Right-click the “Background Intelligent Transfer Service” service & click “Stop” to break the service.
Step#4: Right-click the service and click “Start” to initiate the service.
Step#5: Double-click the service.
Step#6: select “Automatic” under the “Startup type” drop-down.
Step#7: Click “Apply” and “OK”.
By following above steps, you can quickly resolve Error Code 80200011.
Method 4: Temporarily disable any installed 3rd Party Antivirus
Sometimes, Antivirus/Malware/Adware programs distinguishes Microsoft Windows installer files as Spam and blocks or prevents it from installing.
So, visit your vendor’s website for disabling it for a temporary period of time. After completion of installation, you can activate it again.
NOTE: This solution also applies for other versions of Microsoft Windows such as windows 7, windows 8, windows 8.1, and windows 10
In most cases Microsoft Windows update error 80200011 couldn’t be fixed by following steps overhead. If the issue still persists then there may be some critical issue in your system which needs to be fixed manually and is recommended to be done by an experienced Technician.