It has been almost two weeks since Microsoft released Windows 10 October 2018 updates and what a long two weeks it has been.
In the history of Microsoft, these updates could have been worst with numerous bugs which not only made Windows 10 PCs unusable but resulted in the loss of some personal files.
The situation got worse on such extent that Microsoft had to pull the Windows 10 October 2018 Update to give themselves time to properly figure out causes liable behind the problems and their respective solutions. Via this Microsoft also aims at testing the updated build with Windows insiders.
So, in case if you are among those who are running into Windows 10 October 2018 Update Problems, we welcome you to this blog. In this blog, we have covered and gathered up all the Windows 10 October Update problems and their respective fixes.
Table of Contents
- 1 Windows 10 October 2018 Update Problems and their Fixes
- 1.1 Audio issues after installing the Windows 10 October 2018 Update
- 1.2 Windows 10 October 2018 Update has removed files
- 1.3 Apps (including edge) don’t connect to Internet after installing Windows 10 October 2018 Update
- 1.4 Windows 10 October 2018 Update 0x800F0922 Error
- 1.5 Windows 10 October Update 2018 Media Creation Tool Problems
- 1.6 Windows 10 October 2018 Update Installation Problems
- 2 Similar Readings:
Windows 10 October 2018 Update Problems and their Fixes
Audio issues after installing the Windows 10 October 2018 Update
Majority of the Windows users have been reported encountering audio issues after installing Windows 10 October 2018 update. The issue was actually because of incompatibility with an Intel driver.
The issue got widespread on such an extent that Microsoft got enticed to fix the issue.
However in this case, there is now an update that you can download through the Windows Update app which addresses the issue.
Windows 10 October 2018 Update has removed files
This is one of the most severe issues posed by Windows 10 October 2018 update. In the case of this particular update, majority of the people have been reported complaining that after completion of the installation procedure, files stored in their ‘Documents’ folder have gone missing.
The issue stroke Microsoft on such an extent that it need to immediately roll-out of the October 2018 Update.
This clearly shows that how seriously the Microsoft has taken the issue.
Now though it’s not like that everyone has been affected on the PC update, but yet it’s important to thoroughly check your documents folder to see if your files are missing.
In case if they are, there is no need to worry. As Microsoft in that situation suggests calling ‘our support line. They have the tools to get you back to a good state’.
In the US, the Microsoft support number is (800) 642 7676 or (800) 892 5234.
In Australia, call 13 20 58
In the UK, call 0344 800 2400.
For the support number in other countries, check Microsoft’s Website.
Apps (including edge) don’t connect to Internet after installing Windows 10 October 2018 Update
With the installation of Windows 10 October 2018 Update, one other issue encountered by people is the Internet connectivity problem.
There is a common Windows 10 October 2018 Update problem that Windows 10 apps, including the Edge web browser no longer works upon the completion of installation procedure.
Following the installation of Windows 10 October 2018 Update, all the Microsoft Store apps fail to establish connection with the Internet, along with Edge.
At time when attempt is made to navigate to a website, an error message is displayed instead of the site popping up, stating:
‘Hmmm…. Can’t reach this page’.
Now though that’s an annoying issue, however Microsoft on this has detailed a solution stating all you require is to enable IPv6.
For enabling IPv6, users are require to execute the set forth steps:
- Open up Settings.
- Go to Networking & Internet > Network and Sharing Center.
- Make selection of network adapter here.
- Tap Properties. Navigate to the Networking tab.
- Tick box right next to the Internet Version 6 (TCP/IPv6).
- Lastly tap OK to save the changes.
Windows 10 October 2018 Update 0x800F0922 Error
In case if the Windows 10 October 2018 Update fails with 0x800F0922 Error, then an active VPN connection which is interfering with Windows 10 contacting the update servers might be the cause liable behind it.
To fix this issue, you are just required to disconnect from the VPN server and then try again.
If don’t know what a VPN (Virtual Private Network), it means that you don’t have a connection. In that situation, check with your administrator.
Windows 10 October 2018 Update 0x800F0922 Error might occur if the System Reserved partition on your hard drive is full or not large enough.
In this situation a third party software tool can help you out in resizing your partition.
Windows 10 October Update 2018 Media Creation Tool Problems
The Media Creation Tool is actually a handy app developed by Microsoft to allow you to install the Windows 10 October 2018 Update utilizing a USB drive or DVD.
Nonetheless some people might encounter issue while using it.
In case if the Media Creation Tool stuck while attempting to download the Windows 10 October 2018 Update, try closing and reopening the Media Creation Tool app.
Once the app download the files, quickly disconnect PC from the network. You can do this via either removing the Ethernet cable or turning off the Wi-Fi adapter.
Its important for the installation to be continued without checking the Internet for more files. Once the procedure get accomplished, you can reconnect to the Internet.
Lastly open up Windows Update (Settings > Update & Security > Windows Update) . Now tap ‘Check for Update’ to download the final files.
Some people might receive a ‘Dynamic Update’ error message while utilizing the Media Creation Tool.
For fixing this, open up File Explorer and then go to C:\$Windows.~WS\Sources\Windows\sources.
An app namely Setupprep.exe should get shown. Here double-click it for launching the update program.
Windows 10 October 2018 Update Installation Problems
Encountering problems while installing Windows 10 October 2018 Update via Windows 10’s update tool??
It is advised here not to get worried!!
As Windows 10 include a built-in troubleshooter which can help identify any sort of issues. This can also reset the Windows Update app that can ultimately kickstart the installation procedure.
For executing this, users are required to execute the set forth steps:
- Tap Start menu.
- Now click the cog icon on the left, This will open up the Settings window.
- Tap ‘Update & Security’ and then ‘Troubleshoot’.
- Tap ‘Windows Update’ and then ‘Run the Troubleshooter’. Now follow the instructions.
- Click ‘Apply this fix’ in case if the troubleshooter finds a solution.
Free Up Disk Space
As such of several previous major updates for Windows 10, the October 2018 ones also requires a certain amount of hard drive space to successfully download and install.
So, in case if your main hard drive (where Windows 10 get installed, mostly the C:drive) is full, chances are high that you will encounter issues while trying to install Windows 10 October 2018 Update.
Hence, first thing you should do in case if the Windows 10 October 2018 Update install fails is to check the drive space in Windows Explorer.
If its running out of space, try typing in ‘Disk Clean-up’ in search bar onto the task-bar. Now select the system disk (mostly the C: drive).
Tap ‘OK’ and then after that select the tick boxes of the files you desire to delete.
Now though this would be safe to remove, however it is yet advised to keep remember that you can’t recover them once they’re gone. So, its important for you to be told how much exact space you’ll save. Tap ‘OK’ and then ‘Delete files’ to remove the files.
In case if seriously desires to create more space, tap ‘Clean up system files’.
Once done with this, try downloading and installing the Windows 10 October 2018 Update again.
Additional Reading: How to check your OneDrive free space in windows 10?
Deactivate anti-virus software
Antivirus software is usually beneficial, however it sometimes causes issues while trying to install the Windows 10 October 2018 Update.
In case if you have antimalware program installed in your Windows 10 PC, try deactivating it before attempting to install the Windows 10 October 2018 Update, as it might fix the issue.
You can then enable it and utilize it normally once done with the installation procedure.
Sometimes you might even require to uninstall the software temporarily. Just ensure that you reinstall it once the Windows 10 Update installs successfully.
Reset the update
In case if still experiencing issues while trying to install the Windows 10 October 2018 Update, you are might require to reset the update service and try again.
For doing this, open up the Command Prompt via typing ‘CMD’ in the searchbar and right-clicking onto the ‘Command Prompt’. Now select ‘Run as administrator’.
Once open, type in the set forth, pressing Enter after each line:
Afterwards, restart your system and try installing the Windows 10 October 2018 Update once again.
So these were some of the Windows 10 October 2018 Update problems along with their respective fixes.
Hopefully you read the blog thoroughly and fixes included in it would have helped you out in case of encountering any issues associated with Windows 10 Update.
However if still find any problem associated with Windows 10 October 2018 Update which has not been discussed here in this blog, feel free to comment in the comment section.